Make a cardboard frame to decorate a painting

Picture decoration

Today we are going to try to do a job of Crafts which consists of the decoration of picture frames very beautiful and can be adapted to individual tastes To achieve this you need a sheet of gray cardboard frames 1,5 mm thick, 50 × 70, a sheet of 100g gray cardboard of 50 × 70, a sheet of 50 × 70 paper with the desired design, glue, round tip brush n .18, knife and scissors, metal holder.

Cut two cardboard rectangles 13 × 11,5 cm., Into an inner rectangle of 9 × 7,5 cm, so we have a 2 cm frame on each side.

Cut two cardboard strips 13 x 1,5 cm and 8,5 x 1,5 cm long. Glue the longest to the long sides of the frame and the other to one of the two shorter sides. Used to create thick to enter the photography in the frame.

Cut two 17 × 15,5 cm rectangles from the paper (provide 2 cm for each side). Glue the paper to the cardboard is not the way, then beveled corners with scissors paper. Place the frame on the other corner of the paper, it is already covered with glue. Drill an X-cut in the middle and cut inside a 5 × 3,5 cm rectangle, removing the card additional. Stir up the lugs that were formed and include them in the cardboard.

Cut a rectangle of 12 × 10,5 cm paper and glue it on the card stock there is the way to the inside of the coat. Shift back to the pedestal. Always cut a long rectangle from the cardboard of 10 x 4. At a height of 8 cm carve a notch with the knife, with the help of the line. Be careful, however, not to cut the card in two.

Cut a 12 × 7 cm rectangle of paper, place the glue to stick to the thin cardboard, in the non-engraved part. Cut out the four corners and make two cuts at the incision mark. Fold the paper. Review the sign of the incision in the image as exerting some pressure. Cut a rectangle of paper for the back of the support to 9 x 3 cm.

Now you can customize the frame. Incollatene the three sides with the thickness, resting on the rectangular base. Glue the two inches of pedestal (one more than the incision mark) behind the rectangular base. Put everything under a pile of heavy books for at least 12 hours to fit well between the various assembled parts.

More information - Decorate the picture frames

Source - pourfemme.it


Be the first to comment

Leave a Comment

Your email address will not be published. Required fields are marked with *

*

*

  1. Responsible for the data: Miguel Ángel Gatón
  2. Purpose of the data: Control SPAM, comment management.
  3. Legitimation: Your consent
  4. Communication of the data: The data will not be communicated to third parties except by legal obligation.
  5. Data storage: Database hosted by Occentus Networks (EU)
  6. Rights: At any time you can limit, recover and delete your information.