Materials needed for furniture restoration

Before attempting to renovate the cabinet and perform a Furniture restorationFirst of all, you would have to check if you have all the pieces to do any type of operation. It will serve the raw material required for cleaning, rather than the material needed for polishing a piece of furniture or its repair.

What we will do now is make a list of essential elements for the furniture restoration, which describes the proper function and precautions for use. All of the following materials are available at paint or hardware stores, and even DIY stores.

• Sandpaper: to smooth surfaces. It is possible to find different classes, the fine sandpaper for soft woods, and the thicker ones for larger and more robust woods.

• Wood waxes: they are sold in paste or liquid, and spread with a linen cloth on the surface. They are used to provide a satin effect in the cabinet.

• Cola: sold in tablets from the transformation of tendons, skin and bones. To be liquid enough, it must be dissolved in water and heated in a water bath before applying it as a plaster on furniture, before polishing.

• Glue: it is not the toxic adhesive used in any type of work. Contains a proportion of water and has a drying time of up to 12 hours.

• Glue bottoms: it is a glue that is used almost exclusively on paper materials, such as for bottom bonding or to coat the inside of drawers.

• Stains: rarely used, but if you want to improve the color of the wood, adding the stains in the restoration process can have a better effect.

• Carpenter's chalk: also known as plaster of Bologna, it is a plaster that is used exclusively for the furniture repair. Related to glue, it is used in the polishing step.

• Shellac: varnish used in furniture restoration. It brings out the grooves in the wood and enhances the warm colors. It is sold in flakes or granules, it dissolves in alcohol. It has a drying time of around 24 hours and the last layers take a couple of hours longer.

• Impregnation: protect the wood from the action of time and the film that deeply penetrates the defensive formation. It takes two or three coats to be highly effective.

• Stucco: it is a material resistant to the paste, which is used to seal cracks or holes. After many years it can be reduced or broken, so it is necessary to replace it.

• Paints: used to create a thin layer that blocks pores on the surface. Available clear or lightly pigmented to match the original color of the wood. It is distributed on polished and dry wood. It dries in approximately 48 hours and must be sanded and then passed a second coat.

More information - Restoration of antique furniture

Source - pourfemme.it