Necessary materials:
- Small board or piece of wood
- Colored or regular pencils
- Tape
- Sandpaper, coarse and fine
- Epoxy (not quick-drying)
- Eraser pencil, if necessary
- Wood finish (it is recommended to avoid those that contain solvents or penetrants)
- Chain for pendants
Instruments and tools needed:
- Taladro
- Hacksaw and / or handsaw
- Pliers
- Hammer, if necessary
- Step 1:: Gather the necessary materials. You will need a small piece of attractive wood to cut and make your jewelry. The exact size does not matter, but it is recommended that it be at least 5 cm wide. Almost any wood will be last, but avoid those that are very hard.
In addition, you will have to buy some colored pencils, graphite pencils or other interesting cylindrical objects. You can be an old pencil as long as you like its color.
- Step 2:: After sanding the surface, drill holes in the wood. The location and pattern of the holes is up to everyone's personal taste, but be careful not to drill too close to an existing hole or to the edge of the wood. Use a piece of wood underneath to protect the work.
- Step 3:- Use a saw to cut the pencils into pieces that are roughly the same thickness as the wood. Don't worry about being too precise, when in doubt, cut the pencils a little longer than necessary.
Source: craftzine.com