- Step 4:: Mix a batch of epoxy. Be very careful to use the correct ratio of resin to hardener and stir everything very well. Once the mixture is ready, put some epoxy in each hole. It doesn't have to be a lot, just enough to fill in the space between the holes and the pencil pieces once they're inserted there.
- Step 6:: Hold the wood firmly down so it doesn't lose epoxy from the back. Insert the pencils into the open holes. You can use pencils of different colors and place them as you like best. If the parts stick, gently push them in with a hammer. Once you're done, put the piece in a safe place and wait for the resin to dry (usually overnight).
- Step 7: Remove the masking tape and make sure the epoxy is dry before continuing. Cut the wood into sheets.
- Step 8:: With a coarse sandpaper, sand the surface, being careful not to stain the wood.
- Step 9:: Cut the pieces according to the jewelry you will make, such as earrings, and smooth the ends with a soft sandpaper.
- Step 10:- Punch a small hole in the top of the earring, pendant, or earring to attach the clips.
- Step 11:: Apply a protective coat or stain.
Source: craftzine.com